How to clean silver plate on flatware and jewelry requires a softer touch and less-abrasive cleaners to preserve the quality of your plate. When cleaning silver plated items, keeping in mind the dos and don’ts of cleaning solutions will hugely impact the state of your family heirlooms and silverware. If you want to protect the silver plating on your 40-year-old tea set, then you don’t want to use a toothpaste scrub or pure vinegar cleaner.
A natural silver polish for plated items is easy to create and requires simple ingredients for most recipes. The plating will erode and expose the metal beneath to harsh chemicals and everyday wear and tear much more quickly.
Ensuring the silver plate does not flake off due to scratching or scraping the metals is the number one priority. Because silver plating may eventually chip away with repeated exposure to abrasives and harsh chemicals, you want to ease it into the cleaning process with a mild cleaner.
This process involves using warm water and dish soap to clean jewelry at home safely. When using this method to cleansilverplated jewelry, soak the item in a bowl of warm water then rub a few drops of liquid dish soap along the chains and pendants using your fingertips.
However, the high hot water levels and strong dishwasher detergent can speed up the tarnishing process on a silver plate. To use this cleaner, add equal parts warm water and baking soda to create a paste.
Polished silver items retain a protective coating that keeps them shiny and safer longer. Do not leave any excess moisture on the surface when you polish silver, as this can cause water spots.
Whether you are cleaning silver plated coins, silverware, or jewelry, these easy solutions and tips do not require much elbow grease. If you have enjoyed these plated silver cleaning ideas, don’t forget to share how to clean silver plate on Facebook and Pinterest for all your friends and family.
Give the piece three to five minutes of dwell time to loosen dirt or grime, then remove it and place it on a clean surface. While the item is still wet, gently rub its entire surface with a soft, dry cloth or dish sponge to slough off loosened dirt and grime.
Steer clear of steel wool, polishing cloths, or other abrasive utensils, which can scratch silver plate. Rinse the item under warm tap water to wash off lingering debris, then wipe it down with a soft, dry cloth.
After donning gloves, squeeze a dot of silver polish onto a soft, clean, dry cloth. Both sterling silver and silver plated silverware will bring elegance to the dinner table.
The term flatware refers to diner and salad forks, teaspoons and tablespoons and knifes. Sterling silver is used in the production of flatware, as well as the less-expensive silver plated silverware.
Remove silverware and dry completely with a soft cotton cloth. Green has had articles published online ate How, and likes writing about health, food, family and relationships.
Green has taken college workshop classes in language arts and writing through Ohio State University. When Green learned about the opportunity to write online, she knew this was her niche.
Pick a bucket that is large enough for the silver to lay flat and be covered in the liquid. Place a few sheets of aluminum foil on the bottom of your container and make sure that the shiny side is facing up.
We opted to lay the silver tray down before adding the other ingredients to minimize splashing. Sprinkle equal parts salt and baking soda on top of the aluminum foil.
When pouring, stand back because the steam could potentially burn your skin and the smell is not pleasant. To see if the silver is ready, carefully remove it from the hot mixture with tongs and wipe with a soft rag.
Be aware that some darker spots might be the base metal showing through the silver plating. This is common on older pieces where the silver plating has been worn down over time by polishing.
The goal is to remove any leftover salt and baking soda residue that could speed up the tarnishing process in the future. Dry the piece with a soft rag and make sure there is no moisture left, which could also cause the silver to re-tarnish rather quickly.
Grease residue left on the flatware will retard the tarnish removal process in the next step so be sure to complete these instructions. Prepare a tarnish removal bath by filling a large plastic vessel with hot water and approximately 1/2 cup/gallon of washing soda.
There may be a slight rotten egg odor as the bubbles formed are hydrogen sulfide gas. This process is really cool because it reverses the tarnish reaction and silver is not lost as much as it would be with vigorous polishing.
Wet the sponge under warm water then dip it into the polishing paste and rub the silverware until all tarnish is gone. Once all the silver is done, rinse well with very hot water and then hand dry with a clean terry-cotton cloth.
I’ve renewed pieces that have turned to a dark gray back to shiny with the cloths. I have a version that I give to most of my online customers and almost always have one in my purse to shine up mine or a friend’s piece real quick.
I think they’re perfect for maintenance, they’re super easy to use.” Freshman Patel, the owner of Quiet Storms, a jewelry boutique in Williamsburg, also recommends these cloths. “I would encourage everyone to start with a cloth and if you’re not achieving the desired result, consult with a jeweler,” she says.
Anthony Mammon, of Estate Silver Company, says a “wipe on, wash off” polish is “great for cutlery, dishes, bowls, trays, etc.” To use it, you simply “wipe on with a wet sponge, and rinse off and wipe dry.” Mammon notes that this kind of polish should only be used on items that have “no other material attached to the silver, for example wood handles, or any filling inside, for example candlesticks with pitch filling. Just from handling, washing, wiping, etc, the tarnish stays away, so the more you use it, the less you need to polish it, and silver was made to last.